Unitree simulated panda skin, compatible with Unitree Go2

Safety precautions

1. Before installing or removing the outer cover, please make sure that Go2 is operating normally.
2. After wearing, please avoid high jumps, tumbling, lying on the ground, climbing stairs, and rapid rotations to prevent the outer layer from getting entangled in the joints,
3. Keep away from sources of ignition, sharp objects, liquids, and oil stains to prevent damage to the outer skin and internal mechanisms.
4. After donning, be sure to check the tightness to ensure there is no jamming or entanglement when walking or turning.

Installation steps

1. Turn on Go2, disable the obstacle avoidance mode, adjust it to a lying position, and install and secure the radar protective cover.
2. First, lay the panda skin cover flat on a clean and flat surface, and activate the magic sticker to ensure that the cover is fully unfolded.
3. Gently invert the Go2 body and place it in the corresponding position on the leather case, ensuring it is not misaligned. Secure it tightly with the Velcro strap.
4. Thread the four legs into the sleeves of the limbs in order, align the internal holes of the silicone feet with the ball heads on the bottom of the Go2, rotate and secure them to ensure they are properly installed, with the feet facing forward, and then fasten the Velcro on the limbs in order.
5. Secure the belly Velcro tightly to ensure the overall fit is snug and does not wobble.
6. Adjust the robotic panda to a lying position and conduct a low-speed walking test. Ensure that there are no clamping stagnations or scratches before normal use.

Usage Specifications
Recommendations: walking, following, posture display, and mild interaction. Prohibitions: tumbling, high jumping, weight-bearing activities, continuous spinning, and off-road activities
Wade through water.
Environment: For indoor use or use on flat ground only, keep away from long grass
Sand, stone, and muddy water.

Maintenance tips

1. Daily maintenance
   After each use, gently tap to remove dust, comb with a soft comb to keep the fur fluffy. Check the velcro and stitching for firmness, and promptly address any loose issues. Store in a dry, ventilated, and cool place, avoiding heavy pressure and long-term hanging.
2. Cleaning method
   ·Local stains: Use a diluted neutral detergent solution, gently brush with a soft-bristled brush, wipe clean with a slightly damp towel, and allow it to air dry naturally.
   ·Overall cleaning: Hand wash gently with water temperature <30℃. Do not machine wash, do not bleach, and do not wring.
   ·Air drying: Air dry in a shady and ventilated place. You can use a cold-air comb to comb the wool. Strictly avoid exposure to direct sunlight, hot-air baking, and ironing.
3. Long-term preservation
   Put it into a dustproof bag and add a desiccant to prevent moisture, compression, and deformation.
   Take it out once a month, comb the hair, and check for mold or adhesion.

Handling of common problems
Walking with difficulty: Check whether the outer skin of the limbs is too tight, and adjust the tightness again.
Matted fur: Comb the fur in the direction of its growth, avoid pulling it hard, and trim it slightly if necessary.
Not securely fixed: Re-stick the Velcro or properly reinforce the fixing strap.
·Flat hair: A gentle breeze + combing can restore its volume.
Disclaimers
This product is a decorative protective cover for Go2. Damage to the machine or cover caused by improper installation, strenuous exercise, improper washing, or unauthorized modifications is not covered by the warranty.